Monday, December 5, 2022
HomeKayakAirkayaks Information to outfitting your Blackfoot Angler 130 Inflatable Kayak for Fishing

Airkayaks Information to outfitting your Blackfoot Angler 130 Inflatable Kayak for Fishing

One of the vital frequent questions we get in regards to the Blackfoot 130 Inflatable kayak is: How do I outfit it for fishing? As one of the totally featured gear haulers round, we put the Blackfoot to the take a look at and can present ideas and tips to get all the pieces potential out of the Blackfoot 130 from Aquaglide.

First – the place do you place your paddles when fishing?

To do that we advocate paddle holders from the model Yakattack. These can be found nearly anyplace and the road worth is about $15 every.

Set up of Yakattack Rotogrip Paddle Holder on the Blackfoot 130

When putting in the Yakattack Rotogrip Paddle Holder on to the Blackfoot 130 inflatable kayak you must be sure to have the right baseplate and concentrate on right bolt sizing.

YakAttack product requires a YakAttack baseplate.  A Scotty base is not going to work.  There are a couple of totally different YakAttack bases in the marketplace and it will not be apparent which one to decide on. 

The proper base is the Mighty Mount Change.  This base is for what YakAttack describes as old skool deck mounts.  Be aware this mount comes with 1-inch chrome steel bolts. 

 The one-inch bolts are too lengthy for the kayak mounting pad.  The kayak requires 7/8-inch bolts.  To permit the 1-inch bolts to work on this software put the washers that include the bolt earlier than inserting to the bases.  The washer prevents the bolt from taking place into the recessed gap. 

Alternatively, you could possibly find 7/8-inch bolts and washer that match contained in the recessed holes.

Subsequent, the place do I put my beverage?

We advocate the Aquaglide Cupholder for this. Out there at Airkayaks and it has a road worth of $19.95. The cupholder is exclusive from the Yakattack or Railblaza mounts as a result of it might slot in both the facet molle strips or the common baseplate. We will confirm that your favourite cold and warm drinks will match nice!

Subsequent – Mounting Rod Holders on the Blackfoot 130

The Blackfoot 130 comes with a pleasant cooler with 4 built-in rod holders, which is greatest used when it FILLED up with ice or one thing stable. The cooler might be a bit flimsy with out this. With 9 common mounts, you may actually go loopy with rod holders. Railblaza, Yakattack, Ram Mounts, and Scotty model all provide a wide range of mounts, priced between $20 and $30 usually. In case you are shopping for the rod holder, make certain it comes with a base plate as every model requires a novel base plate.

Ensure that to get it on Digicam

Weve examined tons of mounts and located that one of the best Cell Telephone mount comes from the model Railblaza, with a road worth of $35. There are various GoPro / motion cam mounts accessible and we’ve discovered it greatest to get one which articulates, this fashion you may get it out of your means when paddling, and reeling in fish.

A be aware about mounts for the Blackfoot 130

These don’t include bolts.  Native {hardware} shops might solely carry bolts in ¼ inch increments.  If that’s the case a 3/4- inch bolt might be too small and a 1-inch bolt would require washers.  In my case I put the washer between the scotty mount and the kayaks mounting floor.  Alternatively, washers may very well be positioned within the recessed holes if the appropriate dimension will be positioned. 

Under is my Kayak with the equipment mounted. 

Protip: Modify the Body Seat for one of the best pole mounts

The body seat presents an incredible inflexible construction to mount fishing poles nevertheless it doesnt have any pvc pipes to take action. Check out this photograph from an Airkayaks buyer Marco G. Merely ziptie PVC pipe to the body seat, and you’ve got 2 extra rod holders.

Take a look at the Body Seat Rod Holders



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments

%d bloggers like this: